ADSL-WIC für Cisco-Router
Zur Navigation springen
Zur Suche springen
Als Alternative zu externen ADSL-Modems gibt es die Möglichkeit, ADSL-WIC (Wan Interface Card) zu verwenden.
WIC-1ADSL-Varianten
Achtung, kein ADSL2+! — maximal 8 MBit/s downstream, in Deutschland bedeutet das über die Telekom maximal 6 MBit/s, Arcor bietet bis zu 8 MBit/s.
- ADSL over POTS (WIC-1ADSL) für analoge Telefonie wie z. B. in Großbritannien. Äquivalent zum integrierten Modem im Cisco 837-Router. Supports and complies with ANSI T1.413 Issue 2, and ITU G.992.1, Annex A (G.DMT for full-rate ADSL over POTS).
- ADSL over ISDN WAN with Dying Gasp support (WIC-1ADSL-I-DG) für den Einsatz bspw. in Deutschland. Äquivalent zum integrierten Modem im Cisco 836-Router. Allows the coexistence of ADSL and ISDN on the same local loop; supports and complies with ITU G.992.1, Annex B (G.DMT for full-rate ADSL over ISDN), ETSI 101-388, and the Deutsche Telekom U-R2 specification.
- Support auf allen Plattformen ausser 3600 (lt. Cisco-Specs).
Konfiguration für Deutsche Telekom ADSL
Die Konfiguration ist im Endeffekt analog zum integrierten Modem im Cisco 83x. Am Dial-Pool klemmt dann wiederum ein Dialer, der die PPP-Thematik übernimmt.
interface ATM0 no ip address no atm ilmi-keepalive dsl operating-mode annexb-ur2 pvc 1/32 pppoe-client dial-pool-number 1
Kartenstatus-Ausgabe (show dsl interface):
ATU-R (DS) ATU-C (US) Modem Status: Showtime (DMTDSL_SHOWTIME) DSL Mode: AnnexB (Deutsche Telekom U-r2) ITU STD NUM: 0x01 0x01 Vendor ID: 'ALCB' 'BDCM' Vendor Specific: 0x0000 0x619D Vendor Country: 0x00 0xB5 Capacity Used: 100% 91% Noise Margin: 8.0 dB 7.0 dB Output Power: 18.5 dBm 11.5 dBm Attenuation: 38.0 dB 29.0 dB Defect Status: None None Last Fail Code: None Selftest Result: 0x00 Subfunction: 0x11 Interrupts: 2371 (2 spurious) Activations: 162 Init FW: ASW_init_4_10_9.bin Operartion FW: ASW_R4_10_9.bin SW Version: 4.10.9 FW Version: 0x1A04 Interleave Fast Interleave Fast Speed (kbps): 0 4704 0 672 Reed-Solomon EC: 0 0 0 0 CRC Errors: 0 320 0 0 Header Errors: 0 177 1 0 Bit Errors: 0 0 BER Valid sec: 0 0 BER Invalid sec: 0 0 LOM Monitoring : Disabled DMT Bits Per Bin 00: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 10: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 20: 0 A A A A 9 A A A A A A A A A 9 30: 9 9 8 8 8 0 0 0 0 0 0 0 0 0 0 0 40: 6 7 7 8 8 8 8 9 8 9 9 9 9 9 9 9 50: 9 9 9 9 9 9 9 9 A A A A A A A A 60: A A A A A A A A 2 A A A 9 A A A 70: A A A A 9 9 9 9 9 8 8 8 8 7 7 7 80: 7 7 7 6 6 6 6 6 6 6 6 6 6 5 6 6 90: 5 6 6 6 6 6 6 7 7 8 8 9 9 9 9 9 A0: 9 9 9 9 9 9 9 9 9 9 9 8 9 8 9 8 B0: 9 9 9 8 8 9 9 9 8 9 8 9 8 9 8 9 C0: 8 9 8 8 8 8 5 7 7 8 6 7 7 8 8 8 D0: 6 4 7 7 7 6 7 5 7 6 7 5 7 0 0 0 E0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 F0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Training log buffer capability is not enabled yet.
HWIC-1ADSL-Varianten
- HWIC-1ADSL supports ADSL-over-POTS (wie z. B. in Großbritannien) (ADSL, ADSL2, and ADSL2+), complying with Annex A of ITU G.992.1, G.992.3, and G.992.5. Äquivalent zum integrierten Modem im Cisco 877-Router.
- HWIC-1ADSLI supports ADSL-over-ISDN (ADSL, ADSL2, and ADSL2+) für den Einsatz bspw. in Deutschland, complying with Annex B of ITU G.992.1, G.992.3, and G.992.5. It also supports and complies with ETSI 101-388 and the Deutsche Telekom U-R2 specification. Äquivalent zum integrierten Modem im Cisco 876-Router.
- HWIC-1ADSL and HWIC-1ADSLI support reach-extended ADSL2, complying with Annex L of ITU G.992.3.
- HWIC-1ADSL and HWIC-1ADSLI comply with ANSI T1.413 issue 2.
- HWIC-1ADSL and HWIC-1ADSLI support ATM AAL5 services and applications, ATM class of service (constant bit rate [CBR], variable bit rate-nonreal time [VBR-nrt], variable bit rate-real time [VBR-rt], and unspecified bit rate [UBR]), and up to 23 virtual circuits on an HWIC in Cisco routers.
- HWIC-1ADSL and HWIC-1ADSLI provide ATM traffic management and Quality of Service (QoS) features to enable service providers to manage their core ATM network infrastructures.
- HWIC-1ADSL and HWIC-1ADSLI support Dying Gasp functionality.
Konfiguration für Deutsche Telekom ADSL
Die Konfiguration ist im Endeffekt analog zum integrierten Modem im Cisco 87x. Am Dial-Pool klemmt dann wiederum ein Dialer, der die PPP-Thematik übernimmt.
interface ATM0 no ip address no atm ilmi-keepalive dsl operating-mode auto pvc 1/32 pppoe-client dial-pool-number 1
Kartenstatus-Ausgabe (show dsl interface):
ATM0 Alcatel 20190 chipset information ATU-R (DS) ATU-C (US) Modem Status: Showtime (DMTDSL_SHOWTIME) DSL Mode: ITU G.992.5 (ADSL2+) Annex B ITU STD NUM: 0x03 0x1 Chip Vendor ID: 'STMI' 'IFTN' Chip Vendor Specific: 0x0000 0x711C Chip Vendor Country: 0x0F 0xB5 Modem Vendor ID: 'CSCO' ' ' Modem Vendor Specific: 0x0000 0x0000 Modem Vendor Country: 0xB5 0x00 Serial Number Near: FHK1232244U Serial Number Far: Modem VerChip ID: C196 (0) DFE BOM: DFE3.0 Annex B (2) Capacity Used: 98% 92% Noise Margin: 6.5 dB 6.0 dB Output Power: 16.5 dBm 12.5 dBm Attenuation: 15.0 dB 7.0 dB FEC ES Errors: 0 0 ES Errors: 1 0 SES Errors: 1 0 LOSES Errors: 1 0 UES Errors: 0 6 Defect Status: None None Last Fail Code: None Watchdog Counter: 0x9A Watchdog Resets: 0 Selftest Result: 0x00 Subfunction: 0x00 (UR2) Interrupts: 4116 (0 spurious) PHY Access Err: 0 Activations: 1 LED Status: ON LED On Time: 100 LED Off Time: 100 Init FW: init_AMR-4.0.003.bin Operation FW: AMR-4.0.003.bin FW Source: external FW Version: 4.0.3 DS Channel1 DS Channel0 US Channel1 US Channel0 Speed (kbps): 0 17696 0 1064 Cells: 0 26148061 0 2405471703 Reed-Solomon EC: 0 0 0 0 CRC Errors: 0 5621 0 0 Header Errors: 0 4362 0 0 Total BER: 0E-0 1526E-9 Leakage Average BER: 0E-0 2476E-11 Interleave Delay: 0 19 0 3 ATU-R (DS) ATU-C (US) Bitswap: enabled enabled Bitswap success: 0 0 Bitswap failure: 0 0 LOM Monitoring : Disabled DMT Bits Per Bin 000: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 010: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 020: 0 8 8 9 A A B B B C C C C C C C 030: C C B B B B B A A 9 9 8 0 0 4 5 040: 7 7 9 9 A B B B C C C C C C C C 050: C C C C C C C C C C C C C C C D 060: B C C C C C C C C C C C C C C C 070: C C C D D 2 C C C C C C C C C C 080: C C C C C C C C C C C C C C B C 090: C C C C C C C C C C C C C B C B 0A0: B B B B B B B B B B B B B B B B 0B0: B B B B B B B B B B B B B B B B 0C0: B B B B B B B B B B B B B B B B 0D0: B B B B B B B B B B B B B B B B 0E0: B B B B B B A A B A B B B A A B 0F0: A B A A A A A A B B A A A A B A 100: B A B B B B B B B B B B B B B B 110: B B B B B B B B B B B B B B B B 120: B B B B B B B B A B B B B B B B 130: B B B B B B B B B B B B B B B B 140: B B B B B B B B B B B B B B B B 150: B B B B B B B B B B B B B B B B 160: B A A A A B A A A A A A A A A A 170: A A A A A A A A A A A A A A A A 180: A A A A A A A A A A A A A 9 9 9 190: 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 1A0: 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 1B0: 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 1C0: 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 8 1D0: 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 1E0: 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 1F0: 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 DSL: Training log buffer capability is not enabled