Solaris 2.0 SPARC: Unterschied zwischen den Versionen

Aus Knowledgebase
Zur Navigation springen Zur Suche springen
 
Zeile 4: Zeile 4:
  
 
Solaris 2.0 is a FCS release. It is somewhat buggy and feels much slower than later releases.
 
Solaris 2.0 is a FCS release. It is somewhat buggy and feels much slower than later releases.
 
  
 
boot from Solaris 2.5 cdrom
 
boot from Solaris 2.5 cdrom
partition the disk
+
partition the disk.
 
then boot from Solaris 2.0 cdrom and install everything.
 
then boot from Solaris 2.0 cdrom and install everything.
  
Zeile 31: Zeile 30:
 
---------------
 
---------------
  
Patch-ID# 100723-01
+
Patch-ID# 100723-01
Problem Description: Solaris-2.0FCS install procedures leave world-writable
+
Problem Description: Solaris-2.0FCS install procedures leave world-writable
directories, thus opening a path for normal users to gain root privileges.
+
directories, thus opening a path for normal users to gain root privileges.
  
After the installation of Solaris 2.0, the installer should run the
+
After the installation of Solaris 2.0, the installer should run the
following command as root:
+
following command as root:
  
# pkgchk -f
+
# pkgchk -f
  
This command will correct improperly set directory and file attributes
+
This command will correct improperly set directory and file attributes
created during the install process.
+
created during the install process.
  
 
---------------
 
---------------
Zeile 47: Zeile 46:
 
install patches like this:
 
install patches like this:
  
/usr/local/compile/sol21/100833-12/installpatch /usr/local/compile/sol21/100833-12
+
/usr/local/compile/sol21/100833-12/installpatch /usr/local/compile/sol21/100833-12
  
 
needs full paths...
 
needs full paths...
Zeile 55: Zeile 54:
 
.profile:
 
.profile:
  
PATH=/usr/local/bin:/usr/ccs/bin:/usr/sbin:/usr/bin:/usr/ucb:/usr/openwin/bin
+
PATH=/usr/local/bin:/usr/ccs/bin:/usr/sbin:/usr/bin:/usr/ucb:/usr/openwin/bin
export PATH
+
export PATH
  
CFLAGS="-O -I/usr/local/include -L/usr/local/lib -R/usr/local/lib"
+
CFLAGS="-O -I/usr/local/include -L/usr/local/lib -R/usr/local/lib"
CPPFLAGS="-I/usr/local/include"
+
CPPFLAGS="-I/usr/local/include"
LDFLAGS="-L/usr/local/lib -R/usr/local/lib"
+
LDFLAGS="-L/usr/local/lib -R/usr/local/lib"
export CFLAGS CPPFLAGS LDFLAGS
+
export CFLAGS CPPFLAGS LDFLAGS
  
MANPATH=/usr/local/man:/usr/share/man:/usr/openwin/share/man
+
MANPATH=/usr/local/man:/usr/share/man:/usr/openwin/share/man
export MANPATH
+
export MANPATH
  
#CONFIG_SHELL=/usr/local/bin/bash
+
#CONFIG_SHELL=/usr/local/bin/bash
#export CONFIG_SHELL
+
#export CONFIG_SHELL
  
TERM=vt100
+
TERM=vt100
export TERM
+
export TERM
 
                                                          
 
                                                          
  
 
.bashrc:
 
.bashrc:
# set a fancy prompt                                                             
+
# set a fancy prompt                                                             
PS1='\u@\h:\w\$ '                                                               
+
PS1='\u@\h:\w\$ '                                                               
export PS1     
+
export PS1     
  
 
----------------
 
----------------
  
gcc-2.7.2.3:
+
'''gcc-2.7.2.3:'''
install binary build on Solaris 2.1
+
install binary build on Solaris 2.1
 +
 
 +
'''gcc-2.8.1:'''
 +
native build with:
 +
configure --enable-languages=c --without-gnu-ld --with-ld=/usr/ccs/bin/ld
 +
--with-as=/usr/ccs/bin/as --without-gnu-as --disable-locale --disable-nls
 +
 
 +
'''flex-2.5.4a'''
 +
 
 +
'''gzip-1.2.4a'''
 +
 
 +
'''sed-3.02'''
 +
 
 +
'''grep-2.3'''
 +
 
 +
'''copy install-sh from gawk-3.0.6 to /usr/local/bin/install'''
  
gcc-2.8.1:
+
'''m4-1.4.5'''
native build with:
 
configure --enable-languages=c --without-gnu-ld --with-ld=/usr/ccs/bin/ld
 
--with-as=/usr/ccs/bin/as --without-gnu-as --disable-locale --disable-nls
 
  
flex-2.5.4a
+
'''gawk-3.0.6'''
gzip-1.2.4a
 
sed-3.02
 
grep-2.3
 
  
copy install-sh from gawk-3.0.6 to /usr/local/bin/install
+
'''make-3.79:'''
 +
change include <kstat.h> to include <sys/kstat.h> in getloadavg.c at line 425
  
m4-1.4.5
+
'''pdksh-5.2.14:'''
gawk-3.0.6
+
--disable-nls --disable-emacs
  
make-3.79:
+
'''bison-1.28'''
change include <kstat.h> to include <sys/kstat.h> in getloadavg.c at line 425
 
  
pdksh-5.2.14 --disable-nls --disable-emacs
+
'''tar-1.11.8'''
  
bison-1.28
+
'''bash-2.05b:'''
tar-1.11.8
+
bzip2-1.0.6: remove the -f from Makefile
  
bash-2.05b
+
'''ncurses-5.9:'''
bzip2-1.0.6: remove the -f from Makefile
+
--with-shared --without-cxx --without-cxx-binding --without-ada
  
ncurses-5.9
+
'''make-3.82:'''
--with-shared --without-cxx --without-cxx-binding --without-ada
+
change include <kstat.h> to include <sys/kstat.h> in getloadavg.c
  
make-3.82:
+
'''tin-2.4.4-snapshot'''
change include <kstat.h> to include <sys/kstat.h> in getloadavg.c
 
  
tin-2.4.4-snapshot
+
'''zlib-1.2.8'''
zlib-1.2.8
 
  
fileutils-4.1
+
'''fileutils-4.1'''
  
 
[[Kategorie: UNIX]]
 
[[Kategorie: UNIX]]
 
[[Kategorie: Solaris]]
 
[[Kategorie: Solaris]]

Aktuelle Version vom 3. April 2019, 01:19 Uhr

Solaris 2.0 installation on a SPARCstation

Solaris 2.0 booting up

Solaris 2.0 is a FCS release. It is somewhat buggy and feels much slower than later releases.

boot from Solaris 2.5 cdrom partition the disk. then boot from Solaris 2.0 cdrom and install everything.

Solaris 2.0 did not boot the kernel depending on the SCSI disks installed. Worked with two Seagate disks, but not with Quantum or DEC disks...

Solaris 2.0 could not be installed via serial console, because the installation process would not work correctly with the VT100 terminal setting. It needed a graphical console to install.


edit /etc/nsswitch.conf:

hosts:        files dns [NOTFOUND=return]

add gateway to /etc/defaultrouter add hosts to /etc/hosts


uncomment CONSOLE=/dev/console in /etc/default/login to allow remote root login


Patch-ID# 100723-01
Problem Description: Solaris-2.0FCS install procedures leave world-writable
directories, thus opening a path for normal users to gain root privileges.
After the installation of Solaris 2.0, the installer should run the
following command as root:
# pkgchk -f
This command will correct improperly set directory and file attributes
created during the install process.

install patches like this:

/usr/local/compile/sol21/100833-12/installpatch /usr/local/compile/sol21/100833-12

needs full paths...


.profile:

PATH=/usr/local/bin:/usr/ccs/bin:/usr/sbin:/usr/bin:/usr/ucb:/usr/openwin/bin
export PATH
CFLAGS="-O -I/usr/local/include -L/usr/local/lib -R/usr/local/lib"
CPPFLAGS="-I/usr/local/include"
LDFLAGS="-L/usr/local/lib -R/usr/local/lib"
export CFLAGS CPPFLAGS LDFLAGS
MANPATH=/usr/local/man:/usr/share/man:/usr/openwin/share/man
export MANPATH
#CONFIG_SHELL=/usr/local/bin/bash
#export CONFIG_SHELL
TERM=vt100
export TERM
                                                        

.bashrc:

# set a fancy prompt                                                            
PS1='\u@\h:\w\$ '                                                               
export PS1     

gcc-2.7.2.3:

install binary build on Solaris 2.1

gcc-2.8.1:

native build with:
configure --enable-languages=c --without-gnu-ld --with-ld=/usr/ccs/bin/ld
--with-as=/usr/ccs/bin/as --without-gnu-as --disable-locale --disable-nls

flex-2.5.4a

gzip-1.2.4a

sed-3.02

grep-2.3

copy install-sh from gawk-3.0.6 to /usr/local/bin/install

m4-1.4.5

gawk-3.0.6

make-3.79:

change include <kstat.h> to include <sys/kstat.h> in getloadavg.c at line 425

pdksh-5.2.14:

--disable-nls --disable-emacs

bison-1.28

tar-1.11.8

bash-2.05b:

bzip2-1.0.6: remove the -f from Makefile

ncurses-5.9:

--with-shared --without-cxx --without-cxx-binding --without-ada

make-3.82:

change include <kstat.h> to include <sys/kstat.h> in getloadavg.c

tin-2.4.4-snapshot

zlib-1.2.8

fileutils-4.1