Solaris 2.4 SPARC: Unterschied zwischen den Versionen

Aus Knowledgebase
Zur Navigation springen Zur Suche springen
Zeile 1: Zeile 1:
 
'''Solaris 2.4 installation on a SPARCstation'''
 
'''Solaris 2.4 installation on a SPARCstation'''
  
 +
Solaris 2.4 is one of the first releases of Solaris that was considered "good" and "stable". It is the last release to support the sun4 kernel architecture and probably the best of the really old Solaris releases. There is no CDE and no POSIX threads, but the Sun workshop compiler 5.0 is supported.
  
 
Install Solaris with everything + recommended patch cluster.
 
Install Solaris with everything + recommended patch cluster.
Zeile 12: Zeile 13:
 
--------------------------
 
--------------------------
 
.profile:
 
.profile:
 
+
PATH=/usr/local/bin:/opt/SUNWspro/bin:/usr/ccs/bin:/usr/sbin:/usr/bin:/usr/openwin/bin                                                                           
+
PATH=/usr/local/bin:/opt/SUNWspro/bin:/usr/ccs/bin:/usr/sbin:/usr/bin:/usr/openwin/bin                                                                           
export PATH                                                                     
+
export PATH                                                                     
 
                                                                                  
 
                                                                                  
CFLAGS="-O -I/usr/local/include -L/usr/local/lib -R/usr/local/lib"               
+
CFLAGS="-O -I/usr/local/include -L/usr/local/lib -R/usr/local/lib"               
CPPFLAGS="-I/usr/local/include"                                                 
+
CPPFLAGS="-I/usr/local/include"                                                 
LDFLAGS="-L/usr/local/lib -R/usr/local/lib"                                     
+
LDFLAGS="-L/usr/local/lib -R/usr/local/lib"                                     
export CFLAGS CPPFLAGS LDFLAGS                                                   
+
export CFLAGS CPPFLAGS LDFLAGS                                                   
 
                                                                                  
 
                                                                                  
MANPATH=/usr/local/man:/opt/SUNWspro/man:/usr/share/man                         
+
MANPATH=/usr/local/man:/opt/SUNWspro/man:/usr/share/man                         
export MANPATH                                                                   
+
export MANPATH                                                                   
 
                                                                                  
 
                                                                                  
CONFIG_SHELL=/usr/local/bin/bash                                                 
+
CONFIG_SHELL=/usr/local/bin/bash                                                 
export CONFIG_SHELL                                                             
+
export CONFIG_SHELL                                                             
  
root@aton:~# cat .bashrc                                                      
+
.bashrc:
# set a fancy prompt                                                             
+
# set a fancy prompt                                                             
PS1='\u@\h:\w\$ '                                                               
+
PS1='\u@\h:\w\$ '                                                               
export PS1                                                                       
+
export PS1                                                                       
  
 +
--------------------------
  
root@aton:/etc/init.d# cat sshd                                                
+
# sshd init script:
#!/bin/sh                                                                       
+
#!/bin/sh                                                                       
pid=`/usr/bin/ps -e | /usr/bin/grep sshd | /usr/bin/sed -e 's/^  *//' -e 's/ .*/
+
pid=`/usr/bin/ps -e | /usr/bin/grep sshd | /usr/bin/sed -e 's/^  *//' -e 's/ .*//'`                                                                             
/'`                                                                             
+
case $1 in                                                                       
case $1 in                                                                       
+
'start')                                                                         
'start')                                                                         
 
 
         /usr/local/sbin/sshd                                                     
 
         /usr/local/sbin/sshd                                                     
;;                                                                               
+
;;                                                                               
'stop')                                                                         
+
'stop')                                                                         
 
         if [ "${pid}" != "" ]                                                   
 
         if [ "${pid}" != "" ]                                                   
 
         then                                                                     
 
         then                                                                     
Zeile 47: Zeile 48:
 
         fi                                                                       
 
         fi                                                                       
 
         ;;                                                                       
 
         ;;                                                                       
*)                                                                               
+
*)                                                                               
 
         echo "usage: /etc/init.d/sshd {start|stop}"                             
 
         echo "usage: /etc/init.d/sshd {start|stop}"                             
 
         ;;                                                                       
 
         ;;                                                                       
esac                                                                             
+
esac                                                                             
  
  
root@aton:/etc/init.d# cat prngd                                              
+
# prngd init script:
#!/bin/sh                                                                       
+
#!/bin/sh                                                                       
pid=`/usr/bin/ps -e | /usr/bin/grep prngd | /usr/bin/sed -e 's/^  *//' -e 's/ .*
+
pid=`/usr/bin/ps -e | /usr/bin/grep prngd | /usr/bin/sed -e 's/^  *//' -e 's/ .*//'`                                                                             
//'`                                                                             
+
case $1 in                                                                       
case $1 in                                                                       
+
'start')                                                                         
'start')                                                                         
 
 
         /usr/local/sbin/prngd /var/run/egd-pool                                 
 
         /usr/local/sbin/prngd /var/run/egd-pool                                 
;;                                                                               
+
;;                                                                               
'stop')                                                                         
+
'stop')                                                                         
 
         if [ "${pid}" != "" ]                                                   
 
         if [ "${pid}" != "" ]                                                   
 
         then                                                                     
 
         then                                                                     
Zeile 67: Zeile 67:
 
         fi                                                                       
 
         fi                                                                       
 
         ;;                                                                       
 
         ;;                                                                       
*)                                                                               
+
*)                                                                               
 
         echo "usage: /etc/init.d/prngd {start|stop}"                             
 
         echo "usage: /etc/init.d/prngd {start|stop}"                             
 
         ;;                                                                       
 
         ;;                                                                       
esac                                                                             
+
esac                                                                             
  
  
 
-------------------
 
-------------------
  
mirror disks in SPARCstation 10 and 20:
+
mirror disks in SPARCstation 10 and 20 with disksuite:
 
 
disksuite
 
  
 
1. Copy the partition table of the first disk to its mirror.
 
1. Copy the partition table of the first disk to its mirror.
  
prtvtoc /dev/rdsk/c0t3d0s2 | fmthard -s - /dev/rdsk/c0t1d0s2
+
prtvtoc /dev/rdsk/c0t3d0s2 | fmthard -s - /dev/rdsk/c0t1d0s2
 
 
  
 
2. Create at least 2 DiskSuite state database replicas on each disk. A state database replica contains DiskSuite configuration and state information.
 
2. Create at least 2 DiskSuite state database replicas on each disk. A state database replica contains DiskSuite configuration and state information.
  
metadb -a -f -c2 /dev/dsk/c0t1d0s3 /dev/dsk/c0t3d0s3
+
metadb -a -f -c2 /dev/dsk/c0t1d0s3 /dev/dsk/c0t3d0s3
 
 
  
 
3. Mirror the root slice.
 
3. Mirror the root slice.
# metainit -f d10 1 1 c0t3d0s0
+
metainit -f d10 1 1 c0t3d0s0
# metainit -f d20 1 1 c0t1d0s0
+
metainit -f d20 1 1 c0t1d0s0
# metainit d0 -m d10
+
metainit d0 -m d10
# metaroot d0 (Use this command only on the root slice!)
+
metaroot d0 (Use this command only on the root slice!)
 
 
  
 
4. Mirror the swap slice.
 
4. Mirror the swap slice.
# metainit -f d11 1 1 c0t3d0s1
+
metainit -f d11 1 1 c0t3d0s1
# metainit -f d21 1 1 c0t1d0s1
+
metainit -f d21 1 1 c0t1d0s1
# metainit d1 -m d11
+
metainit d1 -m d11
 
 
  
 
5. Mirror the var slice.
 
5. Mirror the var slice.
# metainit -f d14 1 1 c0t3d0s4
+
metainit -f d14 1 1 c0t3d0s4
# metainit -f d24 1 1 c0t1d0s4
+
metainit -f d24 1 1 c0t1d0s4
# metainit d4 -m d14
+
metainit d4 -m d14
 
 
  
 
6. Mirror the usr slice.
 
6. Mirror the usr slice.
# metainit -f d15 1 1 c0t3d0s5
+
metainit -f d15 1 1 c0t3d0s5
# metainit -f d25 1 1 c0t1d0s5
+
metainit -f d25 1 1 c0t1d0s5
# metainit d5 -m d15
+
metainit d5 -m d15
 
 
  
 
7. Mirror the opt slice.
 
7. Mirror the opt slice.
# metainit -f d16 1 1 c0t3d0s6
+
metainit -f d16 1 1 c0t3d0s6
# metainit -f d26 1 1 c0t1d0s6
+
metainit -f d26 1 1 c0t1d0s6
# metainit d6 -m d16
+
metainit d6 -m d16
 
 
  
 
8. Mirror the home slice.
 
8. Mirror the home slice.
# metainit -f d17 1 1 c0t3d0s7
+
metainit -f d17 1 1 c0t3d0s7
# metainit -f d27 1 1 c0t1d0s7
+
metainit -f d27 1 1 c0t1d0s7
# metainit d7 -m d17
+
metainit d7 -m d17
  
 
Update /etc/vfstab to mount the mirrors after boot.
 
Update /etc/vfstab to mount the mirrors after boot.
 
 
like this: (from Solaris 2.5.1, different filesystems!)
 
like this: (from Solaris 2.5.1, different filesystems!)
  
#device        device          mount          FS      fsck    mount  mount
+
#device        device          mount          FS      fsck    mount  mount
#to mount      to fsck        point          type    pass    at boot options
+
#to mount      to fsck        point          type    pass    at boot options
#
+
#
fd      -      /dev/fd fd      -      no      -
+
fd      -      /dev/fd fd      -      no      -
/proc  -      /proc  proc    -      no      -
+
/proc  -      /proc  proc    -      no      -
/dev/md/dsk/d1  -      -      swap    -      no      -
+
/dev/md/dsk/d1  -      -      swap    -      no      -
/dev/md/dsk/d0  /dev/md/rdsk/d0 /      ufs    1      no      -
+
/dev/md/dsk/d0  /dev/md/rdsk/d0 /      ufs    1      no      -
/dev/md/dsk/d6  /dev/md/rdsk/d6 /usr    ufs    1      no      -
+
/dev/md/dsk/d6  /dev/md/rdsk/d6 /usr    ufs    1      no      -
/dev/md/dsk/d4  /dev/md/rdsk/d4 /var    ufs    1      no      -
+
/dev/md/dsk/d4  /dev/md/rdsk/d4 /var    ufs    1      no      -
/dev/md/dsk/d7  /dev/md/rdsk/d7 /export ufs    2      yes    -
+
/dev/md/dsk/d7  /dev/md/rdsk/d7 /export ufs    2      yes    -
/dev/md/dsk/d5  /dev/md/rdsk/d5 /opt    ufs    2      yes    -
+
/dev/md/dsk/d5  /dev/md/rdsk/d5 /opt    ufs    2      yes    -
swap    -      /tmp    tmpfs  -      yes    -
+
swap    -      /tmp    tmpfs  -      yes    -
  
  
Zeile 146: Zeile 136:
 
at last, attach the mirrors:
 
at last, attach the mirrors:
  
metattach d0 d20
+
metattach d0 d20
metattach d1 d21
+
metattach d1 d21
metattach d4 d24
+
metattach d4 d24
metattach d5 d25
+
metattach d5 d25
metattach d6 d26
+
metattach d6 d26
metattach d7 d27
+
metattach d7 d27
  
 
-----------------------------
 
-----------------------------
Zeile 158: Zeile 148:
 
Mount as version 2:
 
Mount as version 2:
  
mount -F nfs -o vers=2 audrey:/export/binaries /mnt
+
mount -F nfs -o vers=2 audrey:/export/binaries /mnt
  
 
----------------------------
 
----------------------------
Zeile 164: Zeile 154:
 
configure gcc like this:
 
configure gcc like this:
  
./../gcc-2.95.3/configure --enable-languages=c,c++,f77 --without-gnu-ld --with-ld=/usr/ccs/bin/ld --with-as=/usr/ccs/bin/as --without-gnu-as --with-libiconv-prefix=/usr/local --disable-nls
+
./../gcc-2.95.3/configure --enable-languages=c,c++,f77 --without-gnu-ld --with-ld=/usr/ccs/bin/ld --with-as=/usr/ccs/bin/as --without-gnu-as --with-libiconv-prefix=/usr/local --disable-nls
  
 
gcc version 2.95.3 and older cannot use binutils. However, there are bugs and limitation in Sun ld and nm. Build GNU binutils (2.12.1 works). gcc version 3.0.4 and later need c++filt, nm, and GNU ld from binutils.
 
gcc version 2.95.3 and older cannot use binutils. However, there are bugs and limitation in Sun ld and nm. Build GNU binutils (2.12.1 works). gcc version 3.0.4 and later need c++filt, nm, and GNU ld from binutils.
copy to /usr/local/bin/c++filt, /usr/local/bin/nm, and /usr/local/bin/gnuld manually. Do not do a "make install" for binutils.  
+
copy to /usr/local/bin/c++filt, /usr/local/bin/nm, and /usr/local/bin/gnuld manually. '''Do not do a "make install" for binutils'''.  
  
 
-----------------------
 
-----------------------
  
getpagesize: undefined symbol
+
'''getpagesize: undefined symbol'''
  
 
Solaris 2 does not have a proper getpagesize. It's a BSD compatibility function, which is not thread safe and not recommended.
 
Solaris 2 does not have a proper getpagesize. It's a BSD compatibility function, which is not thread safe and not recommended.
Zeile 180: Zeile 170:
 
-----------------------
 
-----------------------
  
gcc-3.1.1:
+
'''gcc-3.1.1:'''
 
 
./../gcc-3.1.1/configure --enable-languages=c,c++,f77 --with-ld=/usr/local/bin/gnuld --with-gnu-ld --with-as=/usr/ccs/bin/as --without-gnu-as --with-libiconv-prefix=/usr/local --disable-nls --disable-threads && make bootstrap
 
  
gcc-3.1.1/gcc/config/sparc/sol2.h
+
./../gcc-3.1.1/configure --enable-languages=c,c++,f77 --with-ld=/usr/local/bin/gnuld --with-gnu-ld --with-as=/usr/ccs/bin/as --without-gnu-as --with-libiconv-prefix=/usr/local --disable-nls --disable-threads && make bootstrap
replace
 
long size = getpagesize ();
 
with
 
long size = sysconf(_SC_PAGESIZE);
 
  
also replace getpagesize in gcc/cppfiles.c and gcc/gcc-page.c
+
gcc-3.1.1/gcc/config/sparc/sol2.h
change getpagesize to sysconf. Rest builds fine after installing header patch
+
replace
 +
long size = getpagesize ();
 +
with
 +
long size = sysconf(_SC_PAGESIZE);
  
m4-1.4.8
+
also replace getpagesize in gcc/cppfiles.c and gcc/gcc-page.c
 +
change getpagesize to sysconf. Rest builds fine after installing header patch
  
tar-1.18:
+
'''m4-1.4.8'''
src/misc.c: undefined getpagesize - change to sysconf(_SC_PAGESIZE);
 
src/system.c: undefined snprintf - use missing_snprintf.h
 
  
 +
'''tar-1.18:'''
 +
src/misc.c: undefined getpagesize - change to sysconf(_SC_PAGESIZE);
 +
src/system.c: undefined snprintf - use missing_snprintf.h
  
  
gcc-3.2.3: FAILs
+
'''gcc-3.2.3: FAILs'''
gcc/cppfiles.c
+
gcc/cppfiles.c
gcc/ggc-page.c  
+
gcc/ggc-page.c  
gcc/config/sparc/sol2.h
+
gcc/config/sparc/sol2.h
  
FAILs with asm error:
+
FAILs with asm error:
  
/usr/local/compile/gcc-3.2.3bin/gcc/xgcc -shared-libgcc -B/usr/local/compile/gcc-3.2.3bin/gcc/ -nostdinc++ -L/usr/local/compile/gcc-3.2.3bin/sparc-sun-solaris2.4/libstdc++-v3/src -L/usr/local/compile/gcc-3.2.3bin/sparc-sun-solaris2.4/libstdc++-v3/src/.libs -B/usr/local/sparc-sun-solaris2.4/bin/ -B/usr/local/sparc-sun-solaris2.4/lib/ -isystem /usr/local/sparc-sun-solaris2.4/include -nostdinc++ -I/usr/local/compile/gcc-3.2.3bin/sparc-sun-solaris2.4/libstdc++-v3/include/sparc-sun-solaris2.4 -I/usr/local/compile/gcc-3.2.3bin/sparc-sun-solaris2.4/libstdc++-v3/include -I../../.././../gcc-3.2.3/libstdc++-v3/libsupc++ -I../../.././../gcc-3.2.3/libstdc++-v3/libmath -I/usr/local/include/ncurses -I/usr/local/include -g -O2 -fno-implicit-templates -Wall -Wno-format -W -Wwrite-strings -Winline -fdiagnostics-show-location=once -ffunction-sections -fdata-sections -g -c ../../.././../gcc-3.2.3/libstdc++-v3/src/globals.cc  -fPIC -DPIC -o .libs/globals.o
+
/usr/local/compile/gcc-3.2.3bin/gcc/xgcc -shared-libgcc -B/usr/local/compile/gcc-3.2.3bin/gcc/ -nostdinc++ -L/usr/local/compile/gcc-3.2.3bin/sparc-sun-solaris2.4/libstdc++-v3/src -L/usr/local/compile/gcc-3.2.3bin/sparc-sun-solaris2.4/libstdc++-v3/src/.libs -B/usr/local/sparc-sun-solaris2.4/bin/ -B/usr/local/sparc-sun-solaris2.4/lib/ -isystem /usr/local/sparc-sun-solaris2.4/include -nostdinc++ -I/usr/local/compile/gcc-3.2.3bin/sparc-sun-solaris2.4/libstdc++-v3/include/sparc-sun-solaris2.4 -I/usr/local/compile/gcc-3.2.3bin/sparc-sun-solaris2.4/libstdc++-v3/include -I../../.././../gcc-3.2.3/libstdc++-v3/libsupc++ -I../../.././../gcc-3.2.3/libstdc++-v3/libmath -I/usr/local/include/ncurses -I/usr/local/include -g -O2 -fno-implicit-templates -Wall -Wno-format -W -Wwrite-strings -Winline -fdiagnostics-show-location=once -ffunction-sections -fdata-sections -g -c ../../.././../gcc-3.2.3/libstdc++-v3/src/globals.cc  -fPIC -DPIC -o .libs/globals.o
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 715: error: unknown opcode ".symver"
+
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 715: error: unknown opcode ".symver"
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 715: error: invalid character (0x40)
+
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 715: error: invalid character (0x40)
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 715: error: invalid character (0x40)
+
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 715: error: invalid character (0x40)
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 715: error: statement syntax
+
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 715: error: statement syntax
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 723: error: unknown opcode ".symver"
+
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 723: error: unknown opcode ".symver"
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 723: error: invalid character (0x40)
+
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 723: error: invalid character (0x40)
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 723: error: invalid character (0x40)
+
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 723: error: invalid character (0x40)
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 723: error: statement syntax
+
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 723: error: statement syntax
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 731: error: unknown opcode ".symver"
+
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 731: error: unknown opcode ".symver"
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 731: error: invalid character (0x40)
+
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 731: error: invalid character (0x40)
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 731: error: invalid character (0x40)
+
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 731: error: invalid character (0x40)
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 731: error: statement syntax
+
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 731: error: statement syntax
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 739: error: unknown opcode ".symver"
+
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 739: error: unknown opcode ".symver"
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 739: error: invalid character (0x40)
+
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 739: error: invalid character (0x40)
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 739: error: invalid character (0x40)
+
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 739: error: invalid character (0x40)
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 739: error: statement syntax
+
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 739: error: statement syntax
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 747: error: unknown opcode ".symver"
+
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 747: error: unknown opcode ".symver"
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 747: error: invalid character (0x40)
+
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 747: error: invalid character (0x40)
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 747: error: invalid character (0x40)
+
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 747: error: invalid character (0x40)
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 747: error: statement syntax
+
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 747: error: statement syntax
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 755: error: unknown opcode ".symver"
+
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 755: error: unknown opcode ".symver"
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 755: error: invalid character (0x40)
+
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 755: error: invalid character (0x40)
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 755: error: invalid character (0x40)
+
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 755: error: invalid character (0x40)
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 755: error: statement syntax
+
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 755: error: statement syntax
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 763: error: unknown opcode ".symver"
+
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 763: error: unknown opcode ".symver"
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 763: error: invalid character (0x40)
+
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 763: error: invalid character (0x40)
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 763: error: invalid character (0x40)
+
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 763: error: invalid character (0x40)
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 763: error: statement syntax
+
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 763: error: statement syntax
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 771: error: unknown opcode ".symver"
+
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 771: error: unknown opcode ".symver"
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 771: error: invalid character (0x40)
+
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 771: error: invalid character (0x40)
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 771: error: invalid character (0x40)
+
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 771: error: invalid character (0x40)
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 771: error: statement syntax
+
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 771: error: statement syntax
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 779: error: unknown opcode ".symver"
+
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 779: error: unknown opcode ".symver"
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 779: error: invalid character (0x40)
+
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 779: error: invalid character (0x40)
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 779: error: invalid character (0x40)
+
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 779: error: invalid character (0x40)
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 779: error: statement syntax
+
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 779: error: statement syntax
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 793: error: unknown opcode ".symver"
+
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 793: error: unknown opcode ".symver"
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 793: error: invalid character (0x40)
+
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 793: error: invalid character (0x40)
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 793: error: invalid character (0x40)
+
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 793: error: invalid character (0x40)
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 793: error: statement syntax
+
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 793: error: statement syntax
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 794: error: unknown opcode ".symver"
+
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 794: error: unknown opcode ".symver"
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 794: error: invalid character (0x40)
+
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 794: error: invalid character (0x40)
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 794: error: invalid character (0x40)
+
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 794: error: invalid character (0x40)
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 794: error: statement syntax
+
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 794: error: statement syntax
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 802: error: unknown opcode ".symver"
+
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 802: error: unknown opcode ".symver"
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 802: error: invalid character (0x40)
+
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 802: error: invalid character (0x40)
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 802: error: invalid character (0x40)
+
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 802: error: invalid character (0x40)
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 802: error: statement syntax
+
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 802: error: statement syntax
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 810: error: unknown opcode ".symver"
+
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 810: error: unknown opcode ".symver"
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 810: error: invalid character (0x40)
+
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 810: error: invalid character (0x40)
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 810: error: invalid character (0x40)
+
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 810: error: invalid character (0x40)
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 810: error: statement syntax
+
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 810: error: statement syntax
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 818: error: unknown opcode ".symver"
+
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 818: error: unknown opcode ".symver"
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 818: error: invalid character (0x40)
+
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 818: error: invalid character (0x40)
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 818: error: invalid character (0x40)
+
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 818: error: invalid character (0x40)
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 818: error: statement syntax
+
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 818: error: statement syntax
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 826: error: unknown opcode ".symver"
+
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 826: error: unknown opcode ".symver"
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 826: error: invalid character (0x40)
+
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 826: error: invalid character (0x40)
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 826: error: invalid character (0x40)
+
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 826: error: invalid character (0x40)
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 826: error: statement syntax
+
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 826: error: statement syntax
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 834: error: unknown opcode ".symver"
+
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 834: error: unknown opcode ".symver"
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 834: error: invalid character (0x40)
+
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 834: error: invalid character (0x40)
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 834: error: invalid character (0x40)
+
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 834: error: invalid character (0x40)
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 834: error: statement syntax
+
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 834: error: statement syntax
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 842: error: unknown opcode ".symver"
+
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 842: error: unknown opcode ".symver"
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 842: error: invalid character (0x40)
+
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 842: error: invalid character (0x40)
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 842: error: invalid character (0x40)
+
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 842: error: invalid character (0x40)
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 842: error: statement syntax
+
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 842: error: statement syntax
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 862: error: unknown opcode ".symver"
+
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 862: error: unknown opcode ".symver"
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 862: error: invalid character (0x40)
+
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 862: error: invalid character (0x40)
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 862: error: invalid character (0x40)
+
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 862: error: invalid character (0x40)
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 862: error: statement syntax
+
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 862: error: statement syntax
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 863: error: unknown opcode ".symver"
+
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 863: error: unknown opcode ".symver"
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 863: error: invalid character (0x40)
+
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 863: error: invalid character (0x40)
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 863: error: invalid character (0x40)
+
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 863: error: invalid character (0x40)
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 863: error: statement syntax
+
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 863: error: statement syntax
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 864: error: unknown opcode ".symver"
+
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 864: error: unknown opcode ".symver"
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 864: error: invalid character (0x40)
+
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 864: error: invalid character (0x40)
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 864: error: invalid character (0x40)
+
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 864: error: invalid character (0x40)
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 864: error: statement syntax
+
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 864: error: statement syntax
make[4]: *** [globals.lo] Error 1
+
make[4]: *** [globals.lo] Error 1
make[4]: Leaving directory `/usr/local/compile/gcc-3.2.3bin/sparc-sun-solaris2.4/libstdc++-v3/src'
+
make[4]: Leaving directory `/usr/local/compile/gcc-3.2.3bin/sparc-sun-solaris2.4/libstdc++-v3/src'
make[3]: *** [all-recursive] Error 1
+
make[3]: *** [all-recursive] Error 1
make[3]: Leaving directory `/usr/local/compile/gcc-3.2.3bin/sparc-sun-solaris2.4/libstdc++-v3'
+
make[3]: Leaving directory `/usr/local/compile/gcc-3.2.3bin/sparc-sun-solaris2.4/libstdc++-v3'
make[2]: *** [all-recursive-am] Error 2
+
make[2]: *** [all-recursive-am] Error 2
make[2]: Leaving directory `/usr/local/compile/gcc-3.2.3bin/sparc-sun-solaris2.4/libstdc++-v3'
+
make[2]: Leaving directory `/usr/local/compile/gcc-3.2.3bin/sparc-sun-solaris2.4/libstdc++-v3'
make[1]: *** [all-target-libstdc++-v3] Error 2
+
make[1]: *** [all-target-libstdc++-v3] Error 2
make[1]: Leaving directory `/usr/local/compile/gcc-3.2.3bin'
+
make[1]: Leaving directory `/usr/local/compile/gcc-3.2.3bin'
make: *** [bootstrap] Error 2
+
make: *** [bootstrap] Error 2
  
 
FAILS
 
FAILS
Zeile 304: Zeile 293:
  
  
openssl-1.0.1j: FAILs
+
'''openssl-1.0.1j: FAILs'''
crypto/o_str.c:
+
crypto/o_str.c:
change strings.h to string.h
+
change strings.h to string.h
FAILS in tests
+
FAILS in tests
  
  
gdbm-1.10
+
'''gdbm-1.10:'''
src/flatfile.c:
+
src/flatfile.c:
#include <sys/byteorder.h>
+
#include <sys/byteorder.h>
some tests fail, because we don't have proper diff and sort.
+
some tests fail, because we don't have proper diff and sort.
the rest appears to work.
+
the rest appears to work.
  
 
libsigsev-2.10
 
libsigsev-2.10

Version vom 3. April 2019, 01:34 Uhr

Solaris 2.4 installation on a SPARCstation

Solaris 2.4 is one of the first releases of Solaris that was considered "good" and "stable". It is the last release to support the sun4 kernel architecture and probably the best of the really old Solaris releases. There is no CDE and no POSIX threads, but the Sun workshop compiler 5.0 is supported.

Install Solaris with everything + recommended patch cluster. There are bugs in some /usr/include files. Install patch 101925-02! Very important.


copy Sun compiler license to /opt/SUNWspro/license_dir/sunpro.lic,sp


.profile:

PATH=/usr/local/bin:/opt/SUNWspro/bin:/usr/ccs/bin:/usr/sbin:/usr/bin:/usr/openwin/bin                                                                          
export PATH                                                                     
                                                                               
CFLAGS="-O -I/usr/local/include -L/usr/local/lib -R/usr/local/lib"              
CPPFLAGS="-I/usr/local/include"                                                 
LDFLAGS="-L/usr/local/lib -R/usr/local/lib"                                     
export CFLAGS CPPFLAGS LDFLAGS                                                  
                                                                               
MANPATH=/usr/local/man:/opt/SUNWspro/man:/usr/share/man                         
export MANPATH                                                                  
                                                                               
CONFIG_SHELL=/usr/local/bin/bash                                                
export CONFIG_SHELL                                                             

.bashrc:

# set a fancy prompt                                                            
PS1='\u@\h:\w\$ '                                                               
export PS1                                                                      

  1. sshd init script:
#!/bin/sh                                                                       
pid=`/usr/bin/ps -e | /usr/bin/grep sshd | /usr/bin/sed -e 's/^  *//' -e 's/ .*//'`                                                                             
case $1 in                                                                      
'start')                                                                        
       /usr/local/sbin/sshd                                                    
;;                                                                              
'stop')                                                                         
       if [ "${pid}" != "" ]                                                   
       then                                                                    
               /usr/bin/kill ${pid}                                            
       fi                                                                      
       ;;                                                                      
*)                                                                              
       echo "usage: /etc/init.d/sshd {start|stop}"                             
       ;;                                                                      
esac                                                                            


  1. prngd init script:
#!/bin/sh                                                                       
pid=`/usr/bin/ps -e | /usr/bin/grep prngd | /usr/bin/sed -e 's/^  *//' -e 's/ .*//'`                                                                            
case $1 in                                                                      
'start')                                                                        
       /usr/local/sbin/prngd /var/run/egd-pool                                 
;;                                                                              
'stop')                                                                         
       if [ "${pid}" != "" ]                                                   
       then                                                                    
               /usr/bin/kill ${pid}                                            
       fi                                                                      
       ;;                                                                      
*)                                                                              
       echo "usage: /etc/init.d/prngd {start|stop}"                            
       ;;                                                                      
esac                                                                            



mirror disks in SPARCstation 10 and 20 with disksuite:

1. Copy the partition table of the first disk to its mirror.

prtvtoc /dev/rdsk/c0t3d0s2 | fmthard -s - /dev/rdsk/c0t1d0s2

2. Create at least 2 DiskSuite state database replicas on each disk. A state database replica contains DiskSuite configuration and state information.

metadb -a -f -c2 /dev/dsk/c0t1d0s3 /dev/dsk/c0t3d0s3

3. Mirror the root slice.

metainit -f d10 1 1 c0t3d0s0
metainit -f d20 1 1 c0t1d0s0
metainit d0 -m d10
metaroot d0 (Use this command only on the root slice!)

4. Mirror the swap slice.

metainit -f d11 1 1 c0t3d0s1
metainit -f d21 1 1 c0t1d0s1
metainit d1 -m d11

5. Mirror the var slice.

metainit -f d14 1 1 c0t3d0s4
metainit -f d24 1 1 c0t1d0s4
metainit d4 -m d14

6. Mirror the usr slice.

metainit -f d15 1 1 c0t3d0s5
metainit -f d25 1 1 c0t1d0s5
metainit d5 -m d15

7. Mirror the opt slice.

metainit -f d16 1 1 c0t3d0s6
metainit -f d26 1 1 c0t1d0s6
metainit d6 -m d16

8. Mirror the home slice.

metainit -f d17 1 1 c0t3d0s7
metainit -f d27 1 1 c0t1d0s7
metainit d7 -m d17

Update /etc/vfstab to mount the mirrors after boot. like this: (from Solaris 2.5.1, different filesystems!)

#device         device          mount           FS      fsck    mount   mount
#to mount       to fsck         point           type    pass    at boot options
#
fd      -       /dev/fd fd      -       no      -
/proc   -       /proc   proc    -       no      -
/dev/md/dsk/d1  -       -       swap    -       no      -
/dev/md/dsk/d0  /dev/md/rdsk/d0 /       ufs     1       no      -
/dev/md/dsk/d6  /dev/md/rdsk/d6 /usr    ufs     1       no      -
/dev/md/dsk/d4  /dev/md/rdsk/d4 /var    ufs     1       no      -
/dev/md/dsk/d7  /dev/md/rdsk/d7 /export ufs     2       yes     -
/dev/md/dsk/d5  /dev/md/rdsk/d5 /opt    ufs     2       yes     -
swap    -       /tmp    tmpfs   -       yes     -


reboot the system. at last, attach the mirrors:

metattach d0 d20
metattach d1 d21
metattach d4 d24
metattach d5 d25
metattach d6 d26
metattach d7 d27

Solaris 2.5.1 and older won't cooperate with modern Linux NFSv4. Mount as version 2:

mount -F nfs -o vers=2 audrey:/export/binaries /mnt

configure gcc like this:

./../gcc-2.95.3/configure --enable-languages=c,c++,f77 --without-gnu-ld --with-ld=/usr/ccs/bin/ld --with-as=/usr/ccs/bin/as --without-gnu-as --with-libiconv-prefix=/usr/local --disable-nls

gcc version 2.95.3 and older cannot use binutils. However, there are bugs and limitation in Sun ld and nm. Build GNU binutils (2.12.1 works). gcc version 3.0.4 and later need c++filt, nm, and GNU ld from binutils. copy to /usr/local/bin/c++filt, /usr/local/bin/nm, and /usr/local/bin/gnuld manually. Do not do a "make install" for binutils.


getpagesize: undefined symbol

Solaris 2 does not have a proper getpagesize. It's a BSD compatibility function, which is not thread safe and not recommended.

"getpagesize()" can easily be replaced with "sysconf(_SC_PAGESIZE)".



gcc-3.1.1:

./../gcc-3.1.1/configure --enable-languages=c,c++,f77 --with-ld=/usr/local/bin/gnuld --with-gnu-ld --with-as=/usr/ccs/bin/as --without-gnu-as --with-libiconv-prefix=/usr/local --disable-nls --disable-threads && make bootstrap
gcc-3.1.1/gcc/config/sparc/sol2.h
replace
long size = getpagesize ();
with
long size = sysconf(_SC_PAGESIZE);
also replace getpagesize in gcc/cppfiles.c and gcc/gcc-page.c
change getpagesize to sysconf. Rest builds fine after installing header patch

m4-1.4.8

tar-1.18:

src/misc.c: undefined getpagesize - change to sysconf(_SC_PAGESIZE);
src/system.c: undefined snprintf - use missing_snprintf.h


gcc-3.2.3: FAILs

gcc/cppfiles.c
gcc/ggc-page.c 
gcc/config/sparc/sol2.h
FAILs with asm error:
/usr/local/compile/gcc-3.2.3bin/gcc/xgcc -shared-libgcc -B/usr/local/compile/gcc-3.2.3bin/gcc/ -nostdinc++ -L/usr/local/compile/gcc-3.2.3bin/sparc-sun-solaris2.4/libstdc++-v3/src -L/usr/local/compile/gcc-3.2.3bin/sparc-sun-solaris2.4/libstdc++-v3/src/.libs -B/usr/local/sparc-sun-solaris2.4/bin/ -B/usr/local/sparc-sun-solaris2.4/lib/ -isystem /usr/local/sparc-sun-solaris2.4/include -nostdinc++ -I/usr/local/compile/gcc-3.2.3bin/sparc-sun-solaris2.4/libstdc++-v3/include/sparc-sun-solaris2.4 -I/usr/local/compile/gcc-3.2.3bin/sparc-sun-solaris2.4/libstdc++-v3/include -I../../.././../gcc-3.2.3/libstdc++-v3/libsupc++ -I../../.././../gcc-3.2.3/libstdc++-v3/libmath -I/usr/local/include/ncurses -I/usr/local/include -g -O2 -fno-implicit-templates -Wall -Wno-format -W -Wwrite-strings -Winline -fdiagnostics-show-location=once -ffunction-sections -fdata-sections -g -c ../../.././../gcc-3.2.3/libstdc++-v3/src/globals.cc  -fPIC -DPIC -o .libs/globals.o
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 715: error: unknown opcode ".symver"
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 715: error: invalid character (0x40)
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 715: error: invalid character (0x40)
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 715: error: statement syntax
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 723: error: unknown opcode ".symver"
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 723: error: invalid character (0x40)
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 723: error: invalid character (0x40)
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 723: error: statement syntax
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 731: error: unknown opcode ".symver"
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 731: error: invalid character (0x40)
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 731: error: invalid character (0x40)
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 731: error: statement syntax
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 739: error: unknown opcode ".symver"
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 739: error: invalid character (0x40)
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 739: error: invalid character (0x40)
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 739: error: statement syntax
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 747: error: unknown opcode ".symver"
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 747: error: invalid character (0x40)
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 747: error: invalid character (0x40)
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 747: error: statement syntax
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 755: error: unknown opcode ".symver"
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 755: error: invalid character (0x40)
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 755: error: invalid character (0x40)
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 755: error: statement syntax
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 763: error: unknown opcode ".symver"
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 763: error: invalid character (0x40)
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 763: error: invalid character (0x40)
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 763: error: statement syntax
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 771: error: unknown opcode ".symver"
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 771: error: invalid character (0x40)
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 771: error: invalid character (0x40)
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 771: error: statement syntax
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 779: error: unknown opcode ".symver"
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 779: error: invalid character (0x40)
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 779: error: invalid character (0x40)
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 779: error: statement syntax
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 793: error: unknown opcode ".symver"
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 793: error: invalid character (0x40)
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 793: error: invalid character (0x40)
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 793: error: statement syntax
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 794: error: unknown opcode ".symver"
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 794: error: invalid character (0x40)
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 794: error: invalid character (0x40)
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 794: error: statement syntax
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 802: error: unknown opcode ".symver"
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 802: error: invalid character (0x40)
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 802: error: invalid character (0x40)
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 802: error: statement syntax
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 810: error: unknown opcode ".symver"
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 810: error: invalid character (0x40)
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 810: error: invalid character (0x40)
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 810: error: statement syntax
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 818: error: unknown opcode ".symver"
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 818: error: invalid character (0x40)
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 818: error: invalid character (0x40)
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 818: error: statement syntax
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 826: error: unknown opcode ".symver"
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 826: error: invalid character (0x40)
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 826: error: invalid character (0x40)
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 826: error: statement syntax
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 834: error: unknown opcode ".symver"
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 834: error: invalid character (0x40)
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 834: error: invalid character (0x40)
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 834: error: statement syntax
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 842: error: unknown opcode ".symver"
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 842: error: invalid character (0x40)
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 842: error: invalid character (0x40)
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 842: error: statement syntax
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 862: error: unknown opcode ".symver"
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 862: error: invalid character (0x40)
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 862: error: invalid character (0x40)
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 862: error: statement syntax
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 863: error: unknown opcode ".symver"
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 863: error: invalid character (0x40)
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 863: error: invalid character (0x40)
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 863: error: statement syntax
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 864: error: unknown opcode ".symver"
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 864: error: invalid character (0x40)
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 864: error: invalid character (0x40)
/usr/ccs/bin/as: "/var/tmp//ccfxtJOz.s", line 864: error: statement syntax
make[4]: *** [globals.lo] Error 1
make[4]: Leaving directory `/usr/local/compile/gcc-3.2.3bin/sparc-sun-solaris2.4/libstdc++-v3/src'
make[3]: *** [all-recursive] Error 1
make[3]: Leaving directory `/usr/local/compile/gcc-3.2.3bin/sparc-sun-solaris2.4/libstdc++-v3'
make[2]: *** [all-recursive-am] Error 2
make[2]: Leaving directory `/usr/local/compile/gcc-3.2.3bin/sparc-sun-solaris2.4/libstdc++-v3'
make[1]: *** [all-target-libstdc++-v3] Error 2
make[1]: Leaving directory `/usr/local/compile/gcc-3.2.3bin'
make: *** [bootstrap] Error 2

FAILS apparently, Sun as does not correctly do symbol versioning.


openssl-1.0.1j: FAILs

crypto/o_str.c:
change strings.h to string.h
FAILS in tests


gdbm-1.10:

src/flatfile.c:
#include <sys/byteorder.h>
some tests fail, because we don't have proper diff and sort.
the rest appears to work.

libsigsev-2.10

less-418

libxml-1.8.17

diffutils-3.2 lib/regex.c: change #include <strings.h> to <string.h>


pkg-config-0.25 some tests fails, because of issues with /bin/sh. change to /usr/local/bin/bash and tests work mostly. install anyway.


w3c-libwww-5.4.0

libidn-1.26: ./configure --with-libiconv-prefix=/usr/local --disable-nls --disable-threads && make


perl-5.16.2 ./Configure -Dcc=gcc

Any additional ld flags (NOT including libraries)? [ -L/usr/local/lib] -L/usr/local/lib -R/usr/local/lib