SunOS 4.0.3c SPARC
Installing SunOS 4.0.3c on a SPARCstation 1:
The SPARCstation 1 was released in 1989 and was the first of a long line of iconic pizza box style workstations. SunOS 4.0.3c was a special hardware support release for this new "sun4c" architecture. It was originally available on QIC tape and floppy disks. The floppy disk version has survived the test of time and disk images are now available from your abandonware repository of choice.
The SS1 needs an Open Boot Prom (OBP) version 1.X. A version 2.X can't boot SunOS 4.0 anymore and require SunOS 4.1.1 or newer. If you have an IPC, you can "setenv version2? false" to enable a 1.X compatibility mode. Unfortunately, this feature is not available on the SS1.
As far as the hardware goes, the SS1 comes with a 20MHz SPARCv7 CPU. I assume that you have loaded it with as much 4MB SIMMs as possible (up to 64MB). Base configuration in '89 was 8MB, which was generally seen as "not enough". In terms of graphics, 4.0.3c will likely support bwtwo, cgthree, and the original double width cgsix. The Field Engineer's Handbook says that you shouldn't run an SS1 without any disks and sbus cards, so I would recommend always having "something" in there, even if you don't intend to use it. This might be an issue if you for example use an empty machine with serial console and a SCSI-to-SD adapter. It originally came with internal 100MB 3.5" disks, which were seen as "not big enough". Larger external disks were common as well.
fixing the NVRAM
this machine uses an M48T02 NVRAM, so naturally for a 30-year-old machine the battery is most likely empty. You can still buy replacement NVRAMs (these days often of unknown quality if you end up with a part from a Chinese eBay seller) or you can fix the NVRAM if you have the necessary hardware/soldering skills. After that, the NVRAM needs reprogramming:
enter this series of commands at the "ok" prompt:
press enter after these commands:
set-defaults setenv diag-switch? false f idprom@ 1 xor f mkp
then at last enter this command. Press enter and it will do "nothing". Then you need to confirm with "control-D", "control-R". If it DOESN'T print a copyright message, it worked.
8 0 20 B2 E9 08 B2E908 mkpl
disks
disks need to have a Sun disklabel. SunOS 4 relies on a format.dat and can technically only label disks it knows, because it doesn't have an auto-detect feature. Solaris however uses the same disklabel and its format utility can autodetect disk geometry and label every disk. I generally recommend booting something like Solaris 2.4 to 2.7 and use it to format and partition the disks. The SunOS 4 installation process can then just keep the existing disklabel.
A full installation of SunOS 4.0.3c will use about 65MB + swap space. SunOS 4 uses the old BSD swap mechanism where it can only use as much memory as it has swap space. The old rule was to have twice as much swap space as the machine has RAM. These days, I would be generous with swap, because sometimes building software will need a huge amount of memory.
SunOS releases < 4.1.1 (with a patch) can only use disks up to 1GB. To make my life easier, I decided to use a ZuluSCSI SCSI-to-SD-card adapter. I recommend creating some disk images of about 1000MB size and use these settings in your zuluscsi.ini:
[SCSI] Debug = 0 SelectionDelay = 255 PhyMode = 0 Quirks = 0 EnableUnitAttention = 0 EnableSCSI2 = 1 # Enable faster speeds of SCSI2 EnableSelLatch = 0 MapLunsToIDs = 0 MaxSyncSpeed = 10 # Set to 5 or 10 to enable synchronous SCSI mode [SCSI0] Vendor = "QUANTUM" Product = "FIREBALL1000S" Version = "0700" Type = 0 # 0: Fixed SectorsPerTrack = 54 HeadsPerCylinder = 15
[SCSI3] Vendor = "QUANTUM" Product = "FIREBALL1000S" Version = "0700" Type = 0 # 0: Fixed SectorsPerTrack = 54 HeadsPerCylinder = 15 [SCSI6] Product = "Zulu CD-ROM" Type = 2
Note that the adjustment of Sectors/Heads is necessary to be able to properly format the disk in SunOS. Disk images should be HD0.img, HD3.img, and so on. The cd-rom image should be CD6_512.iso. The will emulate a proper 512-byte/sector cd-rom. ID6 is the default SCSI ID for cd-roms on Suns.
SPARCstations switch up SCSI ids. SCSI ID 3 becomes disk (sd0) and SCSI ID 0 becomes disk3 (sd3). The assumed story behind this is that originally the older Sun3 machines used to boot from SCSI ID 0. Since all disks were external, people wanted to reuse their disks with newer SPARCs. To make transition easier, Sun decided to switch the new default SCSI ID from 0 to 3. In order to prevent people having to learn new commands, they also changed all the SCSI designations. Whatever the actual truth is, it is still confusing to have ID3 show up as sd0. For the purpose of this installation, I assume that you partitioned sd0 with /, swap, and some /var. sd1 will have /usr. Create as many disks as you like, if you want more filesystems.
Filesystem kbytes used avail capacity Mounted on /dev/sd0a 251271 2979 223164 1% / /dev/sd1g 980035 61254 820777 7% /usr /dev/sd3a 980035 535317 346714 61% /export /dev/sd0e 477188 54 429415 0% /var /dev/sd2a 980035 46733 835298 5% /usr/local
Note that the SunOS 4.0.3c generic kernel will assume that SCSI ID 4 and ID5 are tape drives. To change that, you would need a custom kernel.
boot from a cd-rom:
boot sd(0,6,2)
boot from a floppy disk:
boot fd()
installing SunOS
I assume you want to install SunOS using the available floppy images and real floppy disks. Descriptions how to extract the installation files and setup netbooting have been provided elsewhere: http://www.9600bps.org/solaris/sunos403c_diskless.html https://kb.pocnet.net/wiki/SunOS_4_network_boot_howto
So, get your floppy disks ready and be brave! install_disk_A.img and install_disk_B.img are needed to boot the machine. install_disk_C.img and install_disk_D.img are the miniroot. sunos_disk_1.img to sunos_disk_19.img are the SunOS installation sets.
SunOS has a special quirk: It won't properly work with the common terminal setting of 8N1. You need to set the terminal 7E1 or you will only get messed up output after booting the kernel.
Insert the install_disk_A and boot the machine:
boot fd()
it will ask for install_disk_B and drop you into a shell. You could then "format" the disks, but I assume that you have already done to using Solaris. Sun actually provided a README to install SunOS here. I changed the example to properly match "sd0":
1. use "format" to format and/or label the disk as needed
2. "eject" the munixfs diskette ("B") if not already ejected
3. set the variable "disk" to sd0, sd1 or whatever is appropriate
example# disk=sd0
4. run the extract script by sourceing it
example# . /extract
5. follow its instructions
6. when the shell prompts (with "#"), enter:
reboot "sd(0,0,1) -sw"
this will extract the miniroot, copy the miniroot to the swap partition and reboot from that partition. If you mess up the SunOS installation later, the miniroot will still be there. You can restart the installation process simply be booting from the swap partition again ("boot sd(0,0,1) -sw").
Once you boot into the miniroot, SunOS MUNIX will again just drop you into a shell. Enter "suninstall" to start the installation process. The installation process is pretty much the same as with later SunOS releases. Make sure you keep the existing disklabels, choose fd0 as the installation media and feed the machine the other 19 floppy disks. The good thing is, should a disk be unreadable at this point, suninstall will just give you an error and offer you the possibility to try that disk again. That way you can just rewrite the image to a new floppy disk, but you won't have to restart the whole installation process. Let it work and have some patience and it will most likely install just fine. Reboot from the disk ("boot disk") and login to SunOS 4.0.3c.
system configuration
some important binaries are in /usr/5bin. Adjust .cshrc:
set path=(/usr/local/bin /usr/ucb /bin /usr/bin /usr/5bin /etc /usr/etc)
SunOS 4.0.3c won't accept a different $HOME directory for root other than /.
/etc/hosts:
enter your host names here. SunOS 4 can't use DNS by default. It was assumed that people would use NIS = YP.
build a custom kernel
cd /usr/sys/sun4c/conf cp GENERIC MYCONFIG vi MYCONFIG # edit as you like. You will probably want more "maxusers". Set "maxusers" to the amount of RAM in MB you have. config MYCONFIG cd ../MYCONFIG make depend && make mv /vmunix /vmunix.generic mv vmunix /
then reboot.
installing patches
a number of patches were available for SunOS 4.0.3c. Some of them are seriously recommended, if you know what you are doing. I recommend creating a full backup of the disk or disk image before you start. You will need to rebuild the kernel in the end.
there is a problem with /usr/include/machine/setjmp.h. It will be fixed incorrectly by gcc's fixincludes. This files has been slightly changed in SunOS 4.1.3, but it is basically the same. I recommend just replacing (remember to backup) setjmp.h:
/* @(#)setjmp.h 1.5 89/09/08 SMI; from UCB 4.1 83/05/03 */ #ifndef __sparc_setjmp_h #define __sparc_setjmp_h /* * onsstack,sigmask,sp,pc,npc,psr,g1,o0,wbcnt (sigcontext). * All else recovered by under/over(flow) handling. */ #define _JBLEN 9 typedef int jmp_buf[_JBLEN]; /* * One extra word for the "signal mask saved here" flag. */ typedef int sigjmp_buf[_JBLEN+1]; int setjmp(/* jmp_buf env */); int _setjmp(/* jmp_buf env */); int sigsetjmp(/* sigjmp_buf env, int savemask */); void longjmp(/* jmp_buf env, int val */); void _longjmp(/* jmp_buf env, int val */); void siglongjmp(/* sigjmp_buf env, int val */); /* * Routines that call setjmp have strange control flow graphs, * since a call to a routine that calls resume/longjmp will eventually * return at the setjmp site, not the original call site. This * utterly wrecks control flow analysis. */ #pragma unknown_control_flow(sigsetjmp, setjmp, _setjmp) #endif /* !__sparc_setjmp_h */
building software
general notes:
config.guess can't autodetect the OS. Just give sparc-sun-sunos4.0.3. SunOS cc can't use -O and -g together. GNU autoconf will then generally use -g. I recommend to use optimization instead. You will probably need to fix the Makefiles yourself.
sed-3.0.2:
sed/utils.h: needs: #include <sys/types.h>
bash-2.03:
lib/readline/shell.c: #define NULL 0
flex-2.5.4
m4-1.4
make-3.75
bison-1.28
gcc-2.4.5
gzip-1.2.4a
pdksh-5.2.14
tar-1.11.8
top-3.5.1:
os.h:
uncomment inclusion of stdlib.h, because we don't have that here.
utils.c:
#include <missing_snprintf.h>
gcc-2.4.5 and gcc-2.5.8 also work.
gcc-2.6.3:
configure --enable-languages=c,c++ sparc-sun-sunos4.0.3 && make bootstrap
to be continued